Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Not sure if anyone has run in to this before, but I am trying to figure out a way to prevent certain items in the running config from displaying.Here is the situation that I am dealing with:Using ACS v3.3 to authenticate engineers on network devices,...
Martin, you shouldn't have any issues - I moved ringtones from a 6.1.5 system. Just make sure of a couple of things: (1) upload files to all of you CMs' TFTP servers and (2) Get ringtones specified in both "DistinctiveRingList.xml" and "Ringlist.xml"...
Had a similar issue after an upgrade from 6.1.5 to 10.5 using PCD. The ringtone files were present on TFTP servers of the CallManagers, but when trying to download the files, the TFTP client acted as if the files were corrupt or didn't exist on top o...
The unit consists of 2 parts, the power injector and the radio itself. The power injector needs to be indoors or NEMA enclosure. If it's indoors, you can run a power injector cable to the radio, up to 100'. This link http://www.cisco.com/en/US/prod/c...
This article will show you how to adjust power levels for the 1400shttp://www.cisco.com/en/US/docs/wireless/bridge/1400/12.3_8_JA/configuration/guide/p38rf.html#wp1017196Maximum transmit power for point-to-point setup is 250mW or 24dBm (Cisco equipme...
Take a look at the distance calculator tool that I have previously posted.http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/prod_technical_reference0900aecd800f9155.xls It takes multiple factors in to consideration and spits out an a...
