Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I want to deploy an SD-WAN solution with a CPE C1121X-8PLTEP, using MPLS as the primary link and LTE as the secondary link with a PIM card (P-5GS6-GL=). I would like to know the procedure to configure the PIM card. I have noticed that the CPE i...
Hello,I would like to implement a wireless solution with AP 9115, a virtual WLC, a virtual ISE, and an Active Directory for employee SSID user authentication, as well as a captive portal for the guest SSID.I would like your support in preparing the B...
Hello Expert , i deploying Catalyst Sd-WAN and i need the architecture and design to integration my Sd-wan solution on my existing billing platform. i plan to design my sd-wan offers using my existing billing.thnaks in advance
Thanks Jonatan for the quick reponse#1 - Is your firewall allowing this traffic and have you verified in the firewall logs that you see the inbound connections and they are allowed? Yes , my firewall allowing the trafic . #2 - Is your default route...
Hello,I have deployed Cisco ISE on my private cloud using the VMware platform. The inbound management interface is configured with a private IP address on GigabitEthernet0. I have also configured a second interface, GigabitEthernet1, placed in my DMZ...
Helo Dan Thanks for you answer .I think we have the same design, but I don't understand why I'm not receiving any connections on the vBond while I'm receiving connections on the vManage and vSmart.Below the Nat that i applied on my ISR vManage is at...
