I have an ISR 4331 with NIM-ES2-4 module in slot 0/2. I am attaching the output of show running-config.The 4331 WAN is 192.168.1.0/24, connected to g0/0/0 configured as nat outside, and this interface receives its IP configuration from 192.168.1.1 vi...

As the title says, I have a 2921 with one EHWIC-D8ESG and one EHWIC-4ESG (plus one EHWIC-1GE-SFP-CU, which likely does not contribute to the problem). Both Gigabit multi-port EHWICs are connected to VLAN 10, configured as NAT inside. G0/1, G0/2 and G...

A few days ago I made a stray post that did not receive answers (it ended up in the wrong place, if any admins are reading this, please delete it at https://community.cisco.com/t5/switching/nat-on-isr-1921-not-working/m-p/4280492#M499556). I have che...