Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It seems adequate documentation giving explanation on how command "trunk-group name preference" under serial interface configuration works is unavailable. Common belief has provided misleading information on how the "preference" value is related to t...
Hi all,I have a UC520 and a 2691. The UC520 has a SIP phone (7940) registered, and the 2691 has an analogue phone connected to its FXS port. The two routers are connected through a crossover ethernet link. Since the SIP phone is registered, the UC520...
Please disable suppression (right click on the record under RADIUS Livelog and select Bypass Suppression for 1 hour) and test again. There will be more specific errors provided.
After 1.3, the https://ISE:8443/sponsorportal format is obsolete and sponsor.ISE:8443 is required. You can definitely configure ISE:8443 as the sponsor portal, but you will need to use a different port number for the other portals (such as guest port...
yea the SNMP trap probe doesn't provide enough information. You will need the NMAP network scan for HP printers. For NMAP scan to happen, ISE needs to first learn the IP address of the printer via the Framed-IP RADIUS attribute. This attribute is onl...
Anyconnect posture module (which checks for wsus/av compliance) is independent of the VPN module, so you can just push the posture module on its own. NAC Agent is a dated product and it's not covered in the document I found, so I'm not sure if it's s...
I think this doc may be useful:
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
It has some details on the EKU field and certificate template.
Other consideration: if you are plann...
