Is the routing module needed for HSRP to operate?I do not have such module but I was able to configure the feature but it seems they do not communicate both 5Ks remain active and the virtual IP is not reachable.The VLAN is allowed over the vPC pee-li...
HiWe have some discussion in our department about receive queues.What advantages could configuring the wrr-queue receive queues in conjunction with the transmit queues? All the devices in the network are configured with a transmit queueing mechanism ...
Recently I performed a workbook lab with a question about custom queueing. The question was to give a percentage bandwidth to 4 types of traffice20% FTP (1500bytes)30% HTTP (600bytes)40% UDP5001 (300 bytes)10% all that is leftThe bandwidth is devided...
I think Trial and error is the best way to go. There are not may options to try a mask. I don't think it would be larger than a /22 so 9 option to try255.255.255.252 (/30)255.255.255.248 (/29)255.255.255.240 (/28)255.255.255.224 (/27)255.255.255.192 ...
There is a bug for this issue which is fixed in 5.0(2)N2(1) which is on CCO. Here is the bug detailsCSCtk04010 Port errors when adding to port-channel port not compatible [DCE mode]Symptom:Cannot add port to port channel.Error:command failed: port no...
I think this is not possible on the 300. You can do this on the 500/520http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#Cat500
If you are switching between pc and router it cvould happen the mac address of the pc assosiated with the ip adres sticks in the arp cache of the router. Be sure when you switch to the router you clear the arp cach on your internet router. Also be su...
