Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a 4402 WLC running software version 4.2.207.0. There are 5 WLANs enabled and we have 13 AIR-AP1010 accesspoints connected to the WLC.The WLC was recently upgraded from version 4.0.206.0 to provide compatibility with the newer WLCs. The ...
Hello All,I'm having hard time with our NGS. It was using the 2.0.0 version but only tha start- end type time profiles were working with that version. We decided to upgrade to version 2.0.1.Now we have the other types of the time profiles and they ar...
Hello,I have a big bridged network (transparent bridging over GRE). Almost 100 sites are connected to one router. I would like to prevent broadcast, multicast etc. traffic to flow back to the other tunnels. I need to get the traffic to folw into one ...
I have an application running on a linux machine which needs users to be connected directly to the network where the application's interface is located. Unfortunately I have remote users willing to use this application. I do not know much about how t...
Hello Faisal,Thank you very much for your help! I looked through all bug reports but somehow I missed this one. Thank you again, it fixed the problem!Best regards,Peter
Unfortunately I can not configure that kind of access list on a GRE interface and I am using a 2811 router. I was thinking on subscriber-policy commands but at the moment I don't know how would they help.
That is what I am looking for. I have at about 100 sites connecting to a central router via GRE tunnel. On the remote site I put the LAN interface and the GRE tunnel into one bridge-group. On the central site I put the GRE interfaces and the interfac...
Hello Leo,Thanks for the reply. I would love to route the traffic but there is a special application on a cetnral server which was designed for bridged environment. So I need to bridge over a routed environment and I would like to minimize the traffi...
Hello Mujeeb,Bridging over GRE works. Just configure the following (bridge group number must be the same as the BVI interface number):bridge irbbridge 1 protocol ieeeinterface BVI1 ip address /an address from the bridged network/interface Tunnel xbri...
