Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all !!!I'm using 6509 FWSM and wanted to know the command to monitor the port based violation (which are the unnecessary ips and port are trying to access certain interface).thks in advanced,regards,aryan
Hi all !!!In our existing scenario we are using 6509 having switch, msfc, idsm and firewall modules.We are going with ASA 5540 and 3750 switch as a backup for this box.Any suggestions while implementing this like the command which asa doesn't suppor ...
hello everyone, the network scenario is as follow Internet Edge router--E0--Router 28XX --E0--ATM Router 38XX --fiber pvc--ISP. i wanted to divert my default route (internet traffic) to the ISP. The default routes has been added in internet edge rout...
hello everyone,the network scenario is as follow Internet Edge router--E0--Router 28XX --E0--ATM Router 38XX --fiber pvc--ISP.i wanted to divert my default route (internet traffic) to the ISP.The default routes has been added in internet edge router ...
Hi everyone,is there any harm in using GRE tunnel for internet connectivity between my router and ISP router ?earliest reponse will be highly appreciated.regards,aryan
hi...you can login into any route-server (e.g telnet route-server.gblx.net) and then do the traceroute for any of your ip ....you can see the result...whether it is prepended or not and with the numbers it has been prepended.hope this will help you.r...
Hi there..1. with sniffer you can find out the route cause of your problem.2. disable the http server and check.hope this will help you to solve your problem.regards,aryan
hi there !!1. normally it is recommended to use 35XX or higher series router when bgp configurations comes...2. before going to higher end router just check with syslog weather the cpu utilization for your router is going high which might be causing ...
Hi there,Refer the below link, surely help u to understand eigrp concepts.http://cisco.com/en/US/tech/tk1330/tsd_technology_support_technical_reference_chapter09186a00807598ad.htmlregards,aryan
