You can classify traffic on an ingress physical port or on a per-ingress-port per-VLAN basis. You cannot classify traffic at the switch virtual interface level.What does 'per-ingress-port per-VLAN basis' mean..?regards,Gaurav
Hi,There are many very similar cmd for ldp and tdp..e.gno tag-switching propogate-ttl forwrdno mpls propogate-ttl forwardCan we use the commdnas interchangebly or it depends on whcih protocol is in use..Regards,G
Hi,When we use traffic shaping, we say that some extra traffic is stored to aviod droping to some extent. How much traffic can be stored. How to calculate. Is it the size of "bc" normal brust?Regards,Gaurav Prakash
Hi,Can anybody explain the following line from Cisco site..IPv6 routers must not forward packets that have site-local source or destination addresses outside of thesite.Rgds,GP
frame-relay multilink output-threshold (bytes) Configures the number of bytes that a bundle link will transmit before the load-balancing mechanism causes transmission to roll over to the next available link. ?When configured on the bundle interface, ...
Hi,*Apr 18 16:00:20.566: OSPF: Send DBD to 10.10.1.2 on ATM0.1 seq 0x215D opt 0x52 flag 0x1 len 32 *Apr 18 16:00:20.586: OSPF: Rcv DBD from 10.10.1.2 on ATM0.1 seq 0x215D opt 0x52 flag 0x0 len 32 mtu 4470 state EXCHANGE flag 0x1 & 0x0 here indicate t...