Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please can you recommend a router for use between our head office and our offshore platform? This link is considered as a very critical link for the systems offshore. We have currently 2 x Cisco 4500 routers each on either side (total 4 routers). Ea...
I have a 3620 router with 2 FE ports connecting 2 LAN's - one to a trusted partner. I have a simple access list applied "in" to the partners interface. The users at the partners office have severe delays or very poor performance when they try to acce...
I have a Windows XP PC on a PIX 525 DMZ that requires to access a share on a File server that is on the inside interface. The authentication is to a Windows 2003 Active Directory DC on the inside. Which ports should I open?Is it possible to create a ...
I have a few copy scripts that run on a Windows 2000 server on the inside network. These scripts copy files from a server on the DMZ to the inside server and vice versa. Do I need to use an ACL or can I just use a nat /global command as all traffic i...
I used to have exactly similiar problem in at least 3 3500-XL switches. Raised a call with Cisco TAC who recommended replacing the switches. Replaced the switches with new ones as part of Smartnet Advanced replacement and problems never came back.I a...
ip route cache is enabled on the router.My current access list consists of just one lineip access-list extended QRLinkpermit tcp 172.20.8.0 0.0.3.255 172.17.224.32 0.0.0.7 range 3200 3399!interface FastEthernet0/0 ip address 172.17.48.15 255.255.240....
Thanks for your note.I have already opened the above mentioned ports, but they don't seem to be sufficent. I keep getting authentication failures. I think it is because I have a Win2003 Active Directory on the inside and I'm running DNS. Do I have to...
