About pruthviraj

pruthviraj · 01-16-2015

Hi, I do not see packets matching in policy. output below:Switch#sh policy-map interface vlan 2232 Vlan2232 Service-policy input: HARDPHONE-VVLAN Class-map: VOICETRAFFIC (match-all) 0 packets, 0 bytes 5 minute offered rate 0000 bps,...

pruthviraj · 01-05-2007

I want to bind mac addresses of hosts with Ip addresses at switch or routerprovide me the configuration details

pruthviraj · 03-09-2016

Greatly described. I have small query. What is the meaning of below command where only "address-family ipv4" command is configured but no neighbor is mentioned on PE router: address-family ipv4maximum-paths 2exit-address-family Thanks, Pruthvi

pruthviraj · 01-28-2015

Hi, Thanks for your answer. We are using VLAN based QoS. As per my knowledge, to apply VLAN based QoS, policy must be applied on SVI. What about the traffic going out of SVI ? i.e the signalling traffic to call manager. We also have phone call betwe...

pruthviraj · 01-26-2015

Hi,We are using SVI as an interface to apply QoS policy only. Not using it for L-3 or routing. You may see there is no IP address on SVIs and the QoS policy is applied on SVI. interface Vlan2016 description PolicyOnlyInt no ip address service-polic...

pruthviraj · 01-22-2015

Please note that 6500 is used as L2 switch only and SVI are used for applying policies only. ------------------------Configuration below:-------------------class-map match-all VOICESIGNALING match access-group name VOICESIGNALINGclass-map match-all ...

pruthviraj · 01-05-2007

thank you very much

Member Since	‎01-03-2007 08:41 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

QoS Packets not matching on 6500 with SUP720-10GE and SU2T

LAN switching

Re: When to use BGP address-family?

Hi, Thanks for your answer.

Hi,We are using SVI as an

Please note that 6500 is used

Re: LAN switching