About b.swank

b.swank · 12-31-2007

we are installing a 6509-e,sup720, upgrading from a 6509 sup2, moved every thing over to the new 6509-e but when we break the fiber like bewteen the two and change the route statements for the new one we are unable to connect to the internet, but as ...

b.swank · 12-31-2007

we are installing a 6509-e,sup720, upgrading from a 6509 sup2, moved every over to the new 6509-e but when we break the fiber like bewteen the two and change the route statements for the new one we are unable to connect to the internet, but as long a...

b.swank · 01-02-2008

Wilson i have two hwic v2's for my mft, on bonded t's, once the telco bonds them, not sure about over isdn lines.

b.swank · 01-02-2008

I aggree, but i do not know how to put the Check mark to indicate the problem was resolved, Due the complexity of our network combined with the agressiveness of our changes we are making, re-address, removal of our frame on the WAN, new fiber connec...

b.swank · 01-02-2008

We got it Rick, a combo of the Pix and the arp and an acl thanks for your help.

b.swank · 01-01-2008

Rick thanks again, to provide more info here we go.topolgy: bonded T's 3Meg pipe, cisco 2811, cisco pix 515ur, 6509, all via copper. ip addressing is changing was 7 / 24's. on the new core sw (6509-e) 8 /22 and 11 /24's expanding the vlan usage, be...

b.swank · 01-01-2008

Ohassairi, Thank you for wanting to help with this, after reading Rick's post he is correct, I did post in the WAN fourm, and he did offer some very helpful thoughts and I would like to respond to them while providing more information so if you woul...

Member Since	‎01-09-2007 08:13 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

routing issue 6509-e

route problems with 6509-e

Re: Can VWIC MFTs be used for PRI?

Re: route problems with 6509-e

Re: route problems with 6509-e

Re: route problems with 6509-e

Re: routing issue 6509-e