Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I'm doing a lab, I have a 2802i AP as the mobility express controller, and I want to associate a 2602i to it, but I'm getting this error in the console of the 2602i: *May 21 20:30:15.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip...
Hi!I have a 2504 WLC with 60 APs, after a power outage which affected some devices, 4 of the APs changed their IP address, it's supposed they had a static one, but I'm seeing as showed below: AP16#show capwap ip configLWAPP Static IP ConfigurationIP ...
The RF transmit power is changing every time the algorithm runs, is it normal or should it be steady?This is happening in a network with a 2504 Controller and almost 60 APs.
If I have a 2504 wlc with 15 AP licenses and I have 15 APs already registered, but I want to replace some of those APs, are the licenses tied up to the current registered APs or as I remove them from the wlc I can get another new AP joined to the con...
I was investigating a few about this, the thing is that AP 2602i only support capwap, so, the image that works with mobility express is ap3g2-k9w8-mx.153-3.JF12, I already upgraded (finally after many problems), but the thing is that the mobility exp...
Hi Sandeep, I cannot hit any command via console in the 2602, I can see all the logs in the console, but it doesn't accept any command, I mean doesn't respond... Anyway, when it was booting it was showing this:Loading "flash:/ap3g2-k9w8-mx.153-3.JA4/...
Hi Sandeep, thanks for your response. Your second statement is the reponse to my question. Those APs lost connectivity to the wlc and then they got a dhcp IP address, though they are configured with a static one. So if that's the normal behaviour, I'...
Thanks Jurgen. What’s changing is the power levels, I guess maybe there are many 2.4 radios around.. I’ll need to go on site and take a look, as well locate them in the floor plan.
