About DeonLouwBotha

DeonLouwBotha · 03-25-2008

Hi,In need of some help,SMB Company uses standard telephone lines from the telco (FXO) there are 10 employees and 6 lines no dedicated lines to any employee all shared using dial 0 for external line. They want to be able to use the Cisco 7960 + 7914 ...

DeonLouwBotha · 09-17-2008

Hi ewssltd24, Im not able to give a step by step not in the office at the moment but hope this helps.What you are trying to do is forward external WAN address:443 and 80 to internal SBS Address:8080 and 80 without it being affected by the ACLs and Fi...

DeonLouwBotha · 06-24-2008

Hi hothaifa,The 2800 series has a throughput on HWIC slots of up to 400 Mbps half duplex or 800 Mbps aggregate throughput.

DeonLouwBotha · 06-23-2008

Hi Dave, Thats great news was just doing some research on an alternative method other than needing an IOS image when your update came through. All the stuff that you just did is kind of part of your CCNA, so it wasn't a waste of time. Glad your back ...

DeonLouwBotha · 06-23-2008

Hi Dave,No problems in helping we all start and break things at some point :-)To use the ROM monitor, you will be connected with a PC using the console port but this leaves the RJ45 ethernet port free on the router and PC for TFTP.You will be using C...

DeonLouwBotha · 06-23-2008

Hi Dave, If you have SmartNet and a CCO Login you can get IOS from Cisco.com click under support then download software then Cisco IOS Software.Alternatively in your original post you said you had 2 routers both Cisco 1720's,You can use the TFTP serv...

Member Since	‎01-20-2007 12:41 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	21
Total Helpful Votes Received	17

User Statistics

User Activity

FXO Line Monitor on IP Phone

Re: Cisco 877W Config

Re: what is best Switch and router for Branch office

Re: Cisco 1720 issue

Re: Cisco 1720 issue

Re: Cisco 1720 issue