Hi Rob, of course it is possible. First of all you should know which TCP/UDP port numbers will be redirected. For instance, as far as I know only HTTPS (TCP/443) port is enough to communicate with an ESXi server. So if that is the case, you can do it...
Hi Ariel, in firewall point of view, Firewall Cluster knows only one IP address and it doesn't care which device is currently listening on. I mean, if your firewall default gateway is 1.1.1.1, the HSRP group active router listens 1.1.1.1, so you can ...
Hi learnsec, I think we should reply each of the questions seperately.First of all. TFTP Server, CUCMs and DHCP Server can act differently, they can be different devices and they can be in different subnets/networks.Regarding;so new added phones shou...
Hi Tony, I think you have to configure the switch port which connected to the CME router as a trunk. If you configured it properly, it will work.interface fasthernet 1/10 switchport trunk encapsulation dot1q switchport mode trunk!Hope this helpsAli T...
Hi John, you have to disable DHCP in order to set TFTP server option manually. I mean the first option in IPv4 Configuration DHCP must be Disabled.Hope this helpsAli TADIR