i have similar issue while i am running 17.9.3 could be a bug in 17.9.3please refer to below logswwqqspts02c93#sh versionCisco IOS XE Software, Version 17.09.03Cisco IOS Software [Cupertino], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.9.3,...
AP factory reset steps:Reset the AP Cisco IOS Software1.Disconnect power from the AP. ...2.Press and hold the MODE button while you reconnect power to the AP.3.Hold the MODE button until the Status LED turns amber, and then release the button.4.Somet...
I have same probelem in 9120AX AP's however i am running with latest IOS 17.6.X in WLC ++++++++++++++++++wwmnshew09c91#sh loggingConsole logging : Level - notification, Status - enabledSyslog logging : Level - information, Status - active, IP - 255.2...
Hi Julian,i have similar issue can you please refer the below command output.wwnnpags03c93#show logging onboard switch active uptime detail--------------------------------------------------------------------------------UPTIME SUMMARY INFORMATION-----...
i also having same issue, please refer to below logs and advise.++++++++++++++++++*Jan 12 06:58:45.896 UTC: %SPI_FC-3-HIGH_WMARK_REACHED: Number of messages in the queue for channel 9 has reached maximum.-Traceback= 1#b5439af4a89a33e14c7616c14e7451c0...
