About HDTTamHaiAn

HDTTamHaiAn · 09-12-2007

Hi,* I has a connection pool as below for local computers - they go to Internet normally:ip dhcp pool sdm-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.2 dns-server 192.168.1.11 203.162.0.181* And here is the VPN...

HDTTamHaiAn · 07-31-2007

I have 2 sites, each has ADSL static IP connection. At HQ, I use Cisco877-SEC-K9 and Cisco877-K9 at branch.I configured the Internet connection, then try to make a VPN tunnel between them for HQ-branch site-2-site connection, and teleworker (with Cis...

HDTTamHaiAn · 06-29-2007

If I have 2 sites, both using Cisco877-SEC-K9 connect to Internet via ADSL with static IP. I can setup a VPN site-to-site connection between them via IPSec.Is it possible for me to allow teleworker to remote connect to those sites (using VPN client)?...

HDTTamHaiAn · 09-12-2007

After changing configuration like above, users in local LAN cannot connect to Internet, too. Please help.Is it necessary to add access-list?crypto isakmp client configuration group Staff ... acl 150access-list 150 permit ip 192.168.1.0 0.0.0.255 any

HDTTamHaiAn · 08-01-2007

Thanks for your reply, mattias.If I use EasyVPN, can a non-Cisco device can connect to it? Such as an 3rd-party IP phone or softphone on PC?With EasyVPN for L2L & remote, I must create 2 separated VPN servers at HQ or what?Thanks for your help.

HDTTamHaiAn · 06-28-2007

Hi spremkumar,Is it possible if I change the device from ASA to 2 Cisco 877 connect over ADSL?Both devices conect as site-to-site VPN to each-other.And this system also support teleworker to remote connect to them via VPN client? (For ex: make a voic...

Member Since	‎02-04-2007 11:31 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

VPN fail to go Internet

VPN site2site,EasyVPN & client connection

VPN site-to-site & Remote connection

Re: VPN fail to go Internet

Re: VPN site2site,EasyVPN & client connection

Re: Remote Access VPN to Branch Office