I have 3 flexed WLANs at a branch that will receive DHCP from Windows at our DC. I'm unsure of what to set the relay to. Is it our L3 SVI which in turn relays to the DC or do we set the relay to the IP of the Windows server at the DC? Thanks in advan...
I've stood up a new WLC 9800CL at our data center with a bunch of APs sitting boxed at multiple branches. Is there a way to add these APs to the WLC via serial number? Just trying to grasp how to add these APs once they're powered on. Thanks in advan...
Good afternoon,A new client is splitting off from a parent company this Fall. They current have AP1852E-B-K9 and WLC5200 and they want to migrate to 9800-WL. I will have an instance of the 9800-WL stood up before cutover, but once the WAN is moved fr...
Our blade sees the LUN, but when attempting to boot ESXi (legacy bios) I get:Has anyone had experience booting to ESXi? I'm sure I'm missing something easy.Thanks in advance.
Long story short, we have moved some of our M5 blades from one chassis to another. 2 of the 3 are running fine, but the 3rd is throwing NIC errors shown below:These blades are boot from SAN so I'm assuming this is a zoning issue. However, I'm not we...
Yes, flexconnect. Sorry for the confusion. The WLC is at our DC along with our DHCP server. Right now I have the controller set as below. Our branch gateway is a SilverPeak appliance that is relaying to the DHCP at the DC. Thank you
One thing I'm trying to make sense of is the vnics are showing as not participating for this M5 whereas the other servers vnics are bound to a vpc. How to do I go about associating this M5 blade with a vpc?M5 NewUCS-ATLANTA-A(nxos)# sh int vethernet ...
