We have two routers of Cisco 7206VXR series, with one DS3 linkterminating on each of these routers. These links are MPLS linksproviding WAN connectivity to our office. We need to achieveload-balancing on these links. How can I achieve this?

Hi,I have configured kron based commands on my routers & switches to automate Configuration backups. I've pointed this to one of my windows system to have all the configuration files stored.The configurations is as provided below:kron occurrence back...

I have a triangular topology:Location A, B & C are connected to each other over a MAN link.Location A was connected to Location C over MAN links;Location A :Switch Configinterface FastEthernet7/24 description : Connecting Location B no switchport ban...

Hi, I have configured static routes between two routers. I have 4 links between the routers & have traffic routed. The interface IP address :Router -1:Serial 0/0/0 - 192.168.248.1 255.255.255.252Serial0/1/0 - 192.168.248.5 255.255.255.252Serial0/2/0:...

I have my Cisco 4507R switch in the ROM mon mode & the config-register value is seen to be some junk value. I tried executing the commandconfreg 0x2102. This doesn't work.I get the below options:ommon 5 >confreg Configuration Summary : => load rom a...