About girigeek5

girigeek5 · 02-22-2007

Hi,We recently connected a new E3 Link of 8Mbps on to our 2800 series router. We added 4 port FE on this router. The link is through. When I try to assign IP address I am getting following error.% IP addresses may not be configured on L2 linksHow ...

girigeek5 · 02-22-2007

Hi Rick,We have got 2800 series router with 6 Serial Interface, 2 Gig Ethernets and 4 Fast Ethernet cards installed. All the 3 serial cards have been occupied with 6x2Mbps link. One Gig is used for Wireless Connectivity of 2Mbps and One Gig for loc...

girigeek5 · 02-22-2007

Is it possible for me to create a Vlan and bind that to the FE ? If it is possible, then How do I come to know whether the link is down or up ?I tried with bringing down the link on my peer location, but on the primary location, the interface(both F...

girigeek5 · 02-20-2007

You can have various solution on this based on your budget. To suggest or to give idea, you can you either 2960 or 3750 switches both having an option of Fiber modules and 24/48 Gig Ports.If you need more information, then you need to answer the rep...

girigeek5 · 02-18-2007

Hi,It is strongly recommeded to bring down the router while installing any I/O cards. It is a best practice.Good Luck.

girigeek5 · 02-18-2007

Hi,It is better to achieve the Bandwidth Shaping with Router rather than going for a third party appliance. QoS would be the better option for your requirement since your bandwidth is 2mbps.Good Luck.

Member Since	‎02-15-2007 06:57 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

% IP addresses may not be configured on L2 links

Re: % IP addresses may not be configured on L2 links

Re: % IP addresses may not be configured on L2 links

Re: Upgrading to Cisco hardware

Re: 7206VXR

Re: Bandwidth Shaping Appliance