About skiv

skiv · 11-27-2003

Hello Colleagues,I'm trying to apply LLQ on ATM pvc on my 827-4V adsl router. Config is like this:!class-map match-all adsl-voip-traff match access-group 100! policy-map VOIP class adsl-voip-traff priority 320 class class-default ...

skiv · 09-02-2003

Hello Colelagues.I have strange problem with new 6509 with two Sup720 and Netflow export. I have config like this:interface GigabitEthernet5/2 no ip address ip route-cache policy ip route-cache flow media-type rj45 no cdp enable! interface Gi...

skiv · 08-22-2003

Hello Colleagues!Any ideas how to block this scan attmepts: input ifIndex: 10 source IP address: 217.23.129.225 source port: 0 source AS: <unknown>(0) output ifIndex: 0 dest IP address: 192.169.204.232 dest port: ...

skiv · 06-06-2003

Hello colleagues.Does anybody known can I implement Easy VPN beetween cisco 806 and cisco 5350.Cisco Internetwork Operating System Software IOS (tm) 5350 Software (C5350-JK8S-M), Version 12.2(15)T2, RELEASE SOFTWARE (fc2)TAC Support: http://www.cisc...

skiv · 06-04-2003

Hello colleagues.I'm trying to implement VPN thought L2TP tunnel in the following network:PC --- ethernet -- C806 --- ethernet ---- INTERNET --- ethernet -- C2621 -- ethernet --- PCConfigs:C806:hostname VPN-Client!vpdn enable!vpdn-group 1! Default L2...

skiv · 11-28-2003

HelloSoftware (C820-V6Y6-M), Version 12.2(8)T5 = 12.2(8)T5 IP/VOICE IOSSo, I think I'm using IP feature pack.You mean that LLQ is not supported in T IOS train?

skiv · 10-14-2003

Hi! IOS version is 12.2(14)SX1?So check this:http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin09186a0080159849.htmlNote: This module is supported only on the Supervisor Engine 720 using Cisco IOS 12.2(17)SX or Cisco Catalyst 8.1....

skiv · 08-22-2003

Hmm, It's looks like Netflow write icmp flow with dest port 2048. All icmp echo request have dest port 2048. It has confused me. Interesting feature.So, It's like icmp echo request flood.Does anybody know about any virus that make this activity?

skiv · 08-22-2003

I already wrote what I want to block.I want to block only icmp echo request which have been sent to 2048 dest port.I do not want to block all icmp echo request traffic. And of course I know how to write acl,and I already wrote acl like your examples,...

skiv · 06-06-2003

HiJust now tried to implement EasyVPN thought NAT. Everything is working.See crypto isakmp nat keepalive 10no crypto ipsec nat-transparency udp-encapscommands

Member Since	‎12-05-2002 05:08 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	30
Total Helpful Votes Received	7

User Statistics

User Activity

How to apply LLQ to ATM on 827-4V ?

6509 Sup720 Netflow export problem ?

icmp port 2048 scan???

cisco 5350 and EasyVNP server?

VPN L2TP problem

Re: How to apply LLQ to ATM on 827-4V ?

Re: 10G card is unknown on the cat6509

Re: icmp port 2048 scan???

Re: icmp port 2048 scan???

Re: VPN & NAT