About pzimmer1230

pzimmer1230 · 09-03-2010

We ran into a very strange issue that we cannot rationalize and would like some feedback on what might be causing our issue.We have a UCM 7.1 deployment with a 2811 (12.4.12) voice gateway (running H.323), 79xx SCCP handsets and a VG224 (SCCP). For ...

pzimmer1230 · 07-16-2009

Thanks everyone for your responses. I figured out what was going on...We applied an extended ACL to the outside interface, saw the traffic was hitting the ACL, applied another ACL on the VTY connections, saw the traffic was hitting ACL, found a NAT ...

pzimmer1230 · 07-16-2009

Thanks for the reply......We get the same result when we take off the 'ip inspect' policy. There is a CPE device from the carrier on FA0/0 (We do not believe it is performing any filtering or firewall services). To verify our assumption, we took th...

pzimmer1230 · 07-15-2009

No offense taken... I removed the 'access-group 104 in' multiple times all with the same result. I see the packet come in on the interface when I do a debug ip packet (source address) so I know it is hitting the FA0/0 interface. I haven't tried reb...

pzimmer1230 · 07-15-2009

I am have a very interesting issue. I simply want to open Telnet/SSH access to the outside interface of my 520 (Fa0/0). The interesting part of our problem is that when we completely remove the access-group 104 in policy on the outside interface it...

Member Since	‎06-15-2005 02:23 PM
Date Last Visited	‎08-07-2024 01:09 AM
Posts	5

User Statistics

User Activity

(UCM 7.1) Inter-Region Codec Problem

Re: Telnet access to the CLI of my remote UC520 via Internet

Re: Telnet access to the CLI of my remote UC520 via Internet

Re: Telnet access to the CLI of my remote UC520 via Internet

Re: Telnet access to the CLI of my remote UC520 via Internet