Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey Everyone, I am setting up a GNS3 environment where I can do test but im running into a problem. I have already made the templates for the ASAs and they work fine, mostly (a topic for another day). Today I uploaded ASDM, Hostscan and Anyconnect im...
Hey Guys, I have a client who wants to create two Route Based VPNs - one main and one acting as a redundancy. The topology is as follows:TopologyThere are two Tunnel interfaces on the ASA both having a the same physical interface as the tunnel source...
Hey Everyone, I have a customer with who I am troubleshooting a S2S IKEV2 tunnel. He sent me a capture so I can take a look at the tunnel negotiation (debug isn't showing a an explicit reason for failure - Internal error, Unknown and the like) and we...
I solved the problem. If anyone is having the same issue check the file size. It turned out that the FTP upload was stopping at 1/4 the size of the actual file. I caught this first by comparing the md5 checksum on the locally downloaded file and the ...
I made the following changes. Is this ok:crypto ipsec transform-set TS esp-3des esp-sha-hmacmode tunnelcrypto ikev2 profile PROFILEmatch identity remote address 10.10.10.10 255.255.255.255identity local address 10.10.20.20authentication local pre-sha...
Here is the configuration for both sides. I made a lab and I'm trying to set it up using static paths and SLA. Both tunnels go up separately if I disable the other. The problem is that when the main is up on the router both tunnel interfaces keep fla...
