08-24-2021 06:16 PM
Hey Everyone,
I am setting up a GNS3 environment where I can do test but im running into a problem.
I have already made the templates for the ASAs and they work fine, mostly (a topic for another day). Today I uploaded ASDM, Hostscan and Anyconnect images. The ASDM and the Hostscan images work fine, they are enabled, everything is rainbows and firewalls. The Anyconnect image is another story. When I try to add the image under webvpn I get the following error - "extraction failed". I have tried this with different versions of anyconnect with different ASA versions. Nothing works. I am uploading the images through an FTP server.
Solved! Go to Solution.
08-26-2021 04:43 AM
I solved the problem. If anyone is having the same issue check the file size. It turned out that the FTP upload was stopping at 1/4 the size of the actual file. I caught this first by comparing the md5 checksum on the locally downloaded file and the one on the ASA using the "verify /md5 <filepath>" and on my local pc by using File Checksum Integrity Verifier on Windows.
08-26-2021 04:43 AM
I solved the problem. If anyone is having the same issue check the file size. It turned out that the FTP upload was stopping at 1/4 the size of the actual file. I caught this first by comparing the md5 checksum on the locally downloaded file and the one on the ASA using the "verify /md5 <filepath>" and on my local pc by using File Checksum Integrity Verifier on Windows.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide