Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Give try to below-Check if NAT is enabled on the WAN-transport-facing interface.Verify the NAT pool and static NAT configurations.Ensure that the correct NAT type (e.g., end-point independent mapping) is configured.Commands to check the NAT configura...
At the moment I can only think of this as the workaround..do let me know if you can successfully form the tunnel...We would need another separate edge to form the other AWS tunnel and then we can play with ad value to make one primary and backupdo ra...
hmm, interesting requirement!We can use IPsec on vpn0 while deploying an SIG gateway.My hunch would be to see if you can deceive the edge (the DC router) thinking it is a forming IPsec with SIG gateway but in reality, we are tunneling it to AWS.
Check the alternate approach, till the device is completely de-attached from vManage you won't be able to make any changes. Raise a TAC case ask for "unhide viptela_internal" password set the "system is_vmanaged" flag to no and perform the required a...
