Hi dear community,I understand that VPWS (xconnect) signaled by BGP can be achieved in IOS-XR with the address family VPLS-VPWS.What about on IOS-XE ?Thanks and Regards,Jerems

Hi dear community,How can this happen ?Two dot1q headers on a captured MPLS frame going out from a Cisco ISR 1111-8P acting as a PE.Thanks in advance for your help !Regards,Jerems

Hi dear community,I am facing an issue with the following setup :Ping is not OK for the BGP EVPN VPWS Service (Vlan / EVC 20).Here is the configuration of the involed PE :Cisco PE ISR1111:interface GigabitEthernet0/0/1 no ip address negotiation aut...