Hello,
I'm seeing a high channel utilisation on our APs in a high density environment with lots of APs being deployed to cope with capacity. The lower date rates have been disabled. We've only enabled 18Mbs and above on the 5GHz only but using only ...
Hi All,
I've got a customer issue with Window 10 devices not connecting to an Autonomous Access Point Cisco 1702i series version15.3(3)JAB.
It works with windonws 7 but with an upgrade to windows 10, they stopped connecting to the AP. the windons ...
Hello,Does ISE1.1 support TACACS/TACACS+ and H-REAP mode ?Also, customer wants to have quick access to the corporate network with some few laptops without going through the Actice Directory? Any suggestion on this?Thanks Olu
Hello,I have a customer with whom we are replacing all their existing 1242G/4400 series network which uses version 6.0 code and replacing it with CleanAir APs (2600 APs/5508 WLCs) across multiple floors but they want to get it done without interuptin...
I have a request from a cutomer to run a script to create multiple username and password on ACS5.3 Appliance. Does anyone has any suggestion on how to go about this?
Thanks again for the responses.
so how many users will you say the 3700 or probably 3800 APs can handle for video/voice users using Skype or Lync???
its going be challenging not seeing not seeing more APs at -79dBm.
I will probably be looking...
Hi Guys,
Thanks a lot for the response. it has been very helpful. As I mentioned previously, the output sent was when the environment was very quiet and now that everyone is back to work (after the Xmas break) we are seeing 35 -40 users on some of ...
Thanks for replies guys.
Its version 8.2.141.0 using 5520 WLC and the APs are 3702i series. the channel utilisation varies but with few clients 16clients and atimes 8 clients on two APs, I am seeing Channel utilisation of 45% and 53% respectively ....
The high channel utilisation is seen on some of these APs with few clients (13clients) connceted to them.
And with RX-SOP help in any way of bring the utilization down???? Right now the Rx-Sop is on default settings.
Hi Seb,I have configured the SMTP server using the Administrator>System>settings>SMTPand i have added the SMTP server on it and enabled "Email notifications to guests" but the email function is still not working using ISE1.4. Is there any other sett...
