Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am not having any success getting AirPrint to work with my wireless iPad clients. I have a CISCO WLC 8510 running 7.4 code and all CISCO APs. I have configured the mDNS settings per this document: http://www.cisco.com/en/US/docs/wireless/technology...
I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be rec...
I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be rec...
I have a 3750 stack of 4 switches that was installed about 2 years ago. Recently I was doing some work on the switch and realized that I am unable to save the config. I amobviously concerned that if the power fails or the switch reboots I will be rec...
I see that there are multiple discussion on this topic but so far I have not been able to find an answer that fits my situation. I have a WDS server running on a VMware host connected to a Nexus 7010 via a trunk port. I then have a 3750 switch connec...
As it turns out, rebooting the switch did the trick. I had to save the config to a tftp server, reload it and reconfigure. Once I did that I could save the config and edit the flash. I still need to get the code updated but it shouldn't be an issue n...
I have done the command from the stack master and it gives me that error. Apparently it looks like I can download the IP base images but not the Universal. What is the difference between these two and would I want to avoid one or the other?~BRAD
Hmm...I will investigate the code option. I have to figure out how to get it downloaded as some reason CISCO decided that I don't have privileges to the IOS anymore...Thanks for the heads up on the update folder I will give it a shot and reply about ...
Here is the output for this command:switch#sh flash:Directory of flash:/ 2 drwx 512 Jan 2 1994 04:25:13 +00:00 update 3 -rwx 2296 Mar 30 1994 06:15:18 +00:00 vlan.dat 429 -rwx 44493 Oct 8 1994 04:56:32 +00:00 co...
