Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello, I have a cisco ap 9117AXI that is managed by a cisco 9800-cl 17.5.1. I would like to swith the AP mode from local to flex. but flex is not available in the list.
hello, I deploy a new cisco 9800-CL VMware vm and attache some AP 9117AXI to it. I configure some stuff in central switching mode to have the wifi deploy. I test bandwith between AP vlan and the Controleur vlan with iperf and obtain around 800 Mbit/s...
hello world,
I try to connect from an annyconnect ssl 4 client. the connexion is reset an ask back login and password.
I can find anny issue in the log. I don't know where to looking for
6|May 18 2017|16:04:11|302014|111.221.84.4|15211|111.221.84....
Hello World,I try to make a connection to a Wirelless 3G.I configure modem and I think that the modem is connected -----------------show cellular 0/0/0 allHardware Information====================Modem Firmware Version = T1_0_3_2AP R361 CNSZModem Firm...
hello,I try to configure FC on a cisco 5548. I change last interface on the switch in native FC with SFP FC 8G SW an LW. We manage a new vlan associate with a vsan 806Interface are down with error npmExtLinkDown and I can't find any information about...
hello,
sorry for the delay. here are the log. I convert the login username with #### inide
Jul 17 2017 11:13:49: %ASA-6-302020: Built inbound ICMP connection for faddr 10.100.28.71/0 gaddr 192.168.100.194/0 laddr 192.168.100.194/0 type 3 code 3 Jul ...
hello everyone,
I still have my issue and can't connect my 3G interface.
I can complete my issue with this log
*Aug 12 08:35:34.023: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
*Aug 12 08:35:38.019: cellular_dip...
for your Information,Mistake came from a global Qos configuration who break the auto process who create a mandatory QOS for FCoE. so we built a qos who can transport FCoE and is now working.
