Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is still an issue in version 7 Firepower code. It was NOT an issue in the older ASA. I don't care if you think PPPoE is obsolete, it's still used on the Internet. Get it together and support it when defining a PPPoE interface. Per the followin...
Hi All, I have a customer with a meshed WAN of 7 sites, with Cat 2950's at each sites and multiple VLANS. 6 sites are "remotes" one site is "master" and that site has a 3900 series. The problem is all the VLANS do not all appear in all sites. Ther...
Hi All,
First BEFORE any of you toss the hairpin examples at me - I've read all of them and they didn't help. They mainly concern hairpins between static gateway2gateway VPN's coming into an ASA. Here is my setup:
Main ASA #1 that is setup to all...
This is a known bug, using Chrome follow the instructions in the last post herehttps://community.cisco.com/t5/small-business-routers/rv320-firmware-1-4-2-22-refuses-to-display-login-page-with/td-p/3893150 Then when you are logged into the router, got...
You will have to do a tftp recovery. You may need to do it with an older firmware file. Some firmware versions they have released were bad. For example in some of the older versions after a couple weeks of operation the device would stop allowing ...
It is extended L2 and yes broadcast traffic will traverse the links. But the question is, is broadcast traffic a large enough percentage of unicast traffic to impact it and justify complexifying the configuration to turn vtp on? Not to mention that...
Paul the routed network superimposed on this is what prevents unwaranted traffic traversing the links. Each remote site is a separate VLAN and each VLAN is a separate subnet, so when a unicast packet is sent out it has a destination MAC address which...
