About LinuxHandyman

LinuxHandyman · 08-25-2017

Hi, We have created an test environment with a Cisco 7604 with SIP-400 and 2xGE SPA authenticating against freeradius with radius. Customer routers are authenticating with PAP over PPPoE. So far everything is working perfect, the only thing i can't f...

LinuxHandyman · 09-04-2011

Hardware: Cisco 1841 with 2 adsl wic'sSoftware: Advipservices-k9 12.4 25bSkill: Just startedI got 2 RFC1483 bridged connections wich i want to combine in the 1841. What i want is 1 subnet (if possible) route normal internet traffic out on ATM0/0/0Rou...

LinuxHandyman · 08-25-2017

Hi Francesco, Yes Virtual-Template, i started googling last monday and piece by piece built up an PPPoE environment. Currently ATM is out of scope but what would be the advantage or disadvantage to use PPPoEoVLAN, i've have been reading about it but ...

LinuxHandyman · 09-08-2011

After trying reading trying and more reading i came to this.(below)With this config it is running like a charm during up time. But for some reason after more than an hour he kicks out 1 connection this time it was ATM0/0/0.1 shut and no shut will res...

LinuxHandyman · 09-04-2011

Thanks printed out, now a nice seat to go read it.Could be family some way

Member Since	‎09-04-2011 04:49 AM
Date Last Visited	‎09-07-2018 12:03 AM
Posts	5

User Statistics

User Activity

How to control bandwith profiles with PPPoE+radius and Cisco 7604 SIP-400/2xGE SPA

Cisco 1841 with 2 RFC1483 connections

Re: How to control bandwith profiles with PPPoE+radius and Cisco 7604 SIP-400/2xGE SPA

Cisco 1841 with 2 RFC1483 connections

Cisco 1841 with 2 RFC1483 connections