09-04-2011 05:08 AM - edited 03-04-2019 01:30 PM
Hardware: Cisco 1841 with 2 adsl wic's
Software: Advipservices-k9 12.4 25b
Skill: Just started
I got 2 RFC1483 bridged connections wich i want to combine in the 1841.
What i want is 1 subnet (if possible) route normal internet traffic out on ATM0/0/0
Route 1 server and Voip box out on ATM0/1/0
What is the best way to configure this if it is possible with the hardware.
Tried different things allready but no luck
Pretty much in all configs when i connect 1 line it works fine but when i connect the second one all goes wrong.
Hoping someone can point me in the right direction.
09-04-2011 05:47 AM
Best way to achiev this is via policy routing:
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml
regards,
Leo (also van Zeeland)
09-04-2011 06:06 AM
Thanks printed out, now a nice seat to go read it.
Could be family some way
09-08-2011 03:21 PM
After trying reading trying and more reading i came to this.(below)
With this config it is running like a charm during up time. But for some reason after more than an hour he kicks out 1 connection this time it was ATM0/0/0.1 shut and no shut will restore the connection an it runs for an hour or a bit more again.
What could be causing the kick out once in a short while.
Sorry for a maybe bit messy config, still on the first stap on a long long stairs called cisco
Current configuration : 6872 bytes
!
version 12.4
service nagle
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service internal
service compress-config
service sequence-numbers
!
hostname Router-Zapto
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 debugging
logging console critical
!
aaa new-model
!
!
aaa authentication ppp default local
!
aaa session-id common
clock timezone CET 1
clock summer-time GMT date Mar 30 2002 1:00 Oct 26 2035 1:59
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.99
ip dhcp excluded-address 192.168.1.176 192.168.1.255
!
ip dhcp pool Vlan1
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server 194.134.5.55 194.134.5.5
update arp
!
!
no ip bootp server
ip domain name invalid.local
ip name-server 194.134.5.5
ip name-server 194.134.5.55
ip name-server 195.241.77.55
ip name-server 195.241.77.58
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
!
!
crypto pki trustpoint ######
!
!
crypto pki certificate chain TP-###########
quit
username ####
username ####
username ####
archive
log config
hidekeys
!
!
ip tcp synwait-time 15
ip tcp path-mtu-discovery
ip ftp source-interface BVI1
ip ftp username cisco
ip ftp password 7 ###
ip tftp source-interface BVI1
!
!
bridge irb
!
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
bridge-group 1
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
bridge-group 1
!
interface ATM0/0/0
no ip address
atm restart timer 300
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0/0/0.1 point-to-point
description Telfort
ip address dhcp
ip access-group 102 in
no ip unreachables
no ip proxy-arp
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly
atm route-bridged ip
pvc 0/34
!
!
interface ATM0/1/0
no ip address
atm restart timer 300
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0/1/0.1 point-to-point
description Online
ip address dhcp
ip access-group 112 in
no ip unreachables
no ip proxy-arp
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly
atm route-bridged ip
pvc 8/35
!
!
interface Virtual-Template1
ip unnumbered BVI1
peer default ip address pool PPTP-Pool
no keepalive
ppp encrypt mppe auto
ppp authentication pap chap ms-chap ms-chap-v2
!
interface BVI1
description Bridge Interface
ip address 192.168.1.254 255.255.255.0
no ip redirects
no ip unreachables
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip policy route-map NAT
!
ip local policy route-map LOCAL
ip local pool PPTP-Pool 192.168.1.50 192.168.1.59
ip forward-protocol nd
ip forward-protocol turbo-flood
ip route 194.134.5.5 255.255.255.255 ATM0/1/0.1
ip route 194.134.5.55 255.255.255.255 ATM0/1/0.1
ip route 195.241.77.55 255.255.255.255 ATM0/0/0.1
ip route 195.241.77.58 255.255.255.255 ATM0/0/0.1
ip route 0.0.0.0 0.0.0.0 ATM0/0/0.1 dhcp
ip route 0.0.0.0 0.0.0.0 ATM0/1/0.1 dhcp
!
!
ip http server
ip http secure-server
ip nat inside source list 101 interface ATM0/0/0.1 overload
ip nat inside source list 111 interface ATM0/1/0.1 overload
ip nat inside source static tcp 192.168.1.113 5000 interface ATM0/1/0.1 5000
!
access-list 23 remark TTY Security
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 23 permit 91.189.228.192 0.0.0.3
access-list 23 permit 83.117.249.192 0.0.0.3
access-list 99 remark LOCAL
access-list 99 permit 192.168.1.254
access-list 101 remark NAT_Telfort
access-list 101 deny ip any host 194.134.5.5
access-list 101 deny ip any host 194.134.5.55
access-list 101 permit ip host 192.168.1.250 any
access-list 101 deny ip any any
access-list 102 remark Firewall_Incomming_Telfort
access-list 102 deny icmp any any echo
access-list 102 permit ip any any
access-list 111 remark NAT_Online
access-list 111 deny ip any host 195.241.77.55
access-list 111 deny ip any host 195.241.77.58
access-list 111 permit ip 192.168.1.0 0.0.0.255 any
access-list 111 deny ip any any
access-list 112 remark Firewall_incomming_Online
access-list 112 deny icmp any any echo
access-list 112 permit ip any any
access-list 199 remark Local Policy
access-list 199 deny ip any host 194.134.5.5
access-list 199 deny ip any host 194.134.5.55
access-list 199 permit ip host 192.168.1.254 any
access-list 199 deny ip any any
snmp-server community public RO 23
!
route-map LOCAL permit 10
match ip address 199 99
set interface ATM0/0/0.1
set default interface ATM0/0/0.1
!
route-map NAT permit 20
match ip address 101
set interface ATM0/0/0.1
!
route-map NAT permit 30
match ip address 111
set interface ATM0/1/0.1
!
!
!
control-plane
!
bridge 1 protocol ieee
bridge 1 route ip
!
!
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input ssh
line vty 5 15
access-class 23 in
transport input ssh
!
scheduler allocate 20000 1000
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide