About mwtompkins78

mwtompkins78 · 08-09-2021

I have been working with RV325 and was able to add another subnet in the Multiple Subnet Table under Setup-> Network without creating a VLAN. Now we are upgrading to RV345 and I am unable to find where I can add another subnet for routing. Can someon...

mwtompkins78 · 08-10-2021

typically the gateway is 10.12.0.1 and 192.168.1.1 respectively. I really appreciate the help!

mwtompkins78 · 08-10-2021

That would work but what if I had 192.168.1.0/24 and 10.12.0.0/24. I use one of my routers as a setup station and I just add the location I am setting up to the subnet table in the RV325 so my example is a very common occurrence. If VLANs are the onl...

mwtompkins78 · 08-10-2021

Ok that makes sense, I will reach out to them, but until I have time to do that, Any idea how do I replicate that functionality with the RV345, by making a secondary subnet on VLAN1? Thank you!

mwtompkins78 · 08-09-2021

The problem with that is I have to assign it to a port. With the RV325 I could just define a subnet and if a static with that subnet plugged into any port it would just route. Any thoughts on how I can get that functionality with the 345?

Member Since	‎08-09-2021 11:59 AM
Date Last Visited	‎08-11-2021 05:03 AM
Posts	5

User Statistics

User Activity

Multiple Subnet Table RV345

Re: Multiple Subnet Table RV345

Re: Multiple Subnet Table RV345

Re: Multiple Subnet Table RV345

Re: Multiple Subnet Table RV345