About anil.kumar2508

anil.kumar2508 · 12-16-2020

Hello Community members, I am struggling with Output drops on PQ1 (QoS) on my several cisco 9300 series switches. Ports(Te1/1/1 & Te1/1/2) configured as port-channel. Packets are only dropping on interface Te1/1/1. qos queue-softmax-multiplier 1200 a...

anil.kumar2508 · 12-16-2020

Hi Joseph,i did couple of tests on another switch facing same issue.1) Removed output policy from the port----> No output drops at all.2) I swapped the P1 Queue with P2 Queue i.e. my voice traffic now hitting P2 Queue----> But still i saw drops on P1...

anil.kumar2508 · 12-16-2020

Still No change after the flowcontrol receive on

anil.kumar2508 · 12-16-2020

Hi, Other side it is connected to cisco WS-C6509-E. No errors or output drops on port.. interface GigabitEthernet1/6/4description Criticalswitchportswitchport trunk allowed vlan 1,72,168,253,313,431,432,610,741-744,835switchport mode trunkchannel-gr...

anil.kumar2508 · 12-16-2020

Hi George, Thanks for the reply but unfortunately drops are still increasing. Switch#sh int te1/1/1TenGigabitEthernet1/1/1 is up, line protocol is up (connected)Hardware is Ten Gigabit Ethernet, address is xxxxxxxxDescription: "Link "MTU 1500 bytes, ...

Member Since	‎09-04-2016 02:22 AM
Date Last Visited	‎12-28-2020 01:38 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

Output Drops on Priority Queue 1 on Cisco 9300 Switch

Re: Output Drops on Priority Queue 1 on Cisco 9300 Switch

Re: Output Drops on Priority Queue 1 on Cisco 9300 Switch

Re: Output Drops on Priority Queue 1 on Cisco 9300 Switch

Re: Output Drops on Priority Queue 1 on Cisco 9300 Switch