Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We are using dual SSID for our BYOD user onboarding. During the BYOD onboarding flow, the Cisco Network Setup Assistance app is opened manually by the user to continue with the flow (after BYOD portal sign-in) which then deploys the Android Wi...
Hi AllWe have a 5508 UCS 2.2 environment with two FI’s and two 5k Nexus switches. The iSCSI storage is attached to the nexus and currently used for data storage only. The storage (LUN) is presented to the ESXi hosts using separate a VLAN’s X and Y an...
Hi All,Our existing nexus 5k is connected to the Cisco UCS fabric and native FC storage. The 5k is also connected to the LAN network. The default system qos policy for 5k is attached and system wide jumbo mtu option is enabled for the default class. ...
Dear All,We are running an old version of the UCSM (verison 2.2(5a)) with 6248UP FIs and have a requirement to add two addtional 2xvNICs to existing blades. All blades are half size and B200 M3 with 1240 VIC. At present we have 2xvHBA and 4xvNIC (vni...
Hi All I was trying to download 2.25b or 3.1 2b and getting timeouts half way through the download process even after many retries. Please advise. Is there any other link to download? ThanksGA
Hello, We have the same issue when connecting a Windows box and a MacBook behind the same docking station. Any update on the roadmap for a fix? Note: Similar to Anyconnect using the UDID feature to identify the hosts (used for posture compliance) rat...
Hi Howon,Yes, followed the instructions as per the screenshot and also deleted the Wi-Fi network from saved list as well. Each time when the SSID is deleted and reconnect the BYOD flow starts again and the message pop-up again.This happens when the a...
Hi Kirk Thanks for the syslog tip. Still at planning stage. The native vlan to be configured for iscsi boot will have a seperate IP schema than the iscsi storage. We havent discussed the options from the storage side team yet. The plan is to have a s...
Hi Kirk Thanks for the feedback. Probably will use the existing ethernet ports used for the iscsi storage and configure seperate native vlans for iscsi boot for each Fabric A and B side. Currently iscsi storage ethernet uplink ports are attached to t...
