About nico

nico · 08-06-2008

Hi,I'm trying to build en Easy VPN connection between two ASA5505's. Initial configuration was simple and the tunnel is up. The problem is that I can't get any packets trough. A packet-trace in ASDM on the remote site reports IPSec spoof detected.Any...

nico · 11-15-2012

Thanks

nico · 11-14-2012

@Bongsu KwonHow have you confirmed this?check http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/phones/ps10998/ip_phone_comparison_matrix.pdfIt states 8945 is not supported on UC500.Wich software was running on the UC540?

nico · 10-02-2008

Setup is like:Lan1 --- ASA1 --- internet --- NAT_device --- ASA2 -- LAN2Tunnel will be initiated from ASA2 to ASA1, shouldn't the nat device handle all natting dynamicaly?

nico · 08-07-2008

On the serverside I have added:crypto dynamic-map outside_dyn_map 20 set reverse-routeStill no go...

nico · 08-07-2008

Thanks for your reply.I changed the serverside config, but still can't ping to a machine behind the client ASA.

Member Since	‎01-14-2008 09:01 AM
Date Last Visited	‎09-14-2018 06:06 AM
Posts	9

User Statistics

User Activity

Easy VPN connection with remote side behind NAT device

UC540 : video call using 99XX, 8945 ip phones

UC540 : video call using 99XX, 8945 ip phones

Re: Easy VPN connection with remote side behind NAT device

Re: Easy VPN connection with remote side behind NAT device

Re: Easy VPN connection with remote side behind NAT device