Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, I have this issue for a long time now. We have two pair of FTDs in HA in two different DCs. We have VTIs setup in both HA pairs going to each remote site. This case have been with Cisco TAC for a long time and we still not get to the real pr...
Hi, I starting to see this alerts in the logs of one of the stacks of 9300's we are using as a fusion router. Someone can advise here: %PKI-3-CERTIFICATE_INVALID_EXPIRED: Certificate chain validation has failed. The certificate (SN: 2C8E9CAC8794AB1A3...
I will need some recommendations with this, I need to upgrade couple C9500's from 17.3.5 to 17.9.2, just need to know if there is any limitations or restrictions by doing this.
I just upgrade from 17.3.5 to 17.6.5, I used the command request platform software package expand file bootflash:isr4400-universalk9.17.06.05.SPA.bin, and then change the boot variable to packages.conf, rebooted the router and all good so far until I...
We are upgrading the C9300 we have in the same office to that version, so we was thinking to have all devices running the same version for consistance.
So in this case if I want the IOS 17.6.5 to be on Install mode, what should I do from there, like for example when I try to activate the bin file I got and error back saying this:LON-WAN-03#install activate/usr/binos/conf/install_engine.sh: line 66: ...
Hi Julio seems like none of those are valid commands for this IOS version.LON-WAN-03#sh inLON-WAN-03#sh insLON-WAN-03#sh install acLON-WAN-03#sh install active sumLON-WAN-03#sh install active summLON-WAN-03#sh install active ?| Output modifiers<cr> <...
