Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a problem getting boot from SAN working. I have a UCS B series. I have configured fiber channel and it is up and working. If I boot from a vmware CD, I can see the SAN and install to the proper LUN. When I try to setup the system to b...
Just installed PI 2.1 and added a Nexus 7004, but the device type comes up as a Nexus 9500 and it fails inventory collection. Is there a way to force the device type, or and update to fix this?
I am trying to setup a UCSB to boot esxi off an iSCSI drive. I have the iSCSI boot setup and it looks good, but when I boot ESXi, it does not show the iSCSI drive as available to install to. Any ideas where I should be looking?Forgot to mention, it...
What is the magic formula to get OSX clients to connect to a RV082 with IPSec? I have tried IPsecuritas, but am unable to connect. From the logs it appears that phase one fails as they can't agree on settings.Attached is the full log.
Managed to find a way to change the nwwn, but made no difference:
INTERFACE VSAN FCID PORT NAME NODE NAME --------------------------------------------------------------------------------fc1/10 100 0x0f0020 21:00:00:24:ff:2f:fa:dc 20:00:00:24:ff:2f:fa...
It is a dual port:
INTERFACE VSAN FCID PORT NAME NODE NAME --------------------------------------------------------------------------------fc1/10 100 0x0f0020 21:00:00:24:ff:2f:fa:dc 20:00:00:24:ff:2f:fa:dcfc1/11 200 0x5c0000 21:00:00:24:ff:2f:fa:dd ...
