Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Previously,we email to pi-nfr@cisco.com to obtain NFR license for MSE 7.4.110. We incluse MSE detail VUDI, MSE version and order no. 2 weeks ago. But until now we didnt received the mail back from cisco. Usually, how long we would received the NFR li...
Our objective is to monitor all our network devices using Cisco Prime Infrastructure 2.0 which include LAN site and WAN site. LAN site we have various of equipments example cisco router 3800, ASA 5510, Catalyst switch 6500 and other access switches. ...
I have problem with device limit. So far i only add-in 46switches but only showing 43switches. Also i found out on the user tracking around 57devices. Is the user include on the NFR license 100devices? If that so, how can i limit the license only to ...
Hi,I have this issue after Cisco send us RMA. Whenever i restart the AP, it wont able to auto boot. I have to type command manually to boot the AP. Is there any command or way to make this AP to auto boot?please advice.Thank you in advance.
Hi,We need to create one user for wireless management which only can do specific command on wireless controller. What we can find out is only join the controller to ACS(TACACS+) which only can perform below:The available roles are MONITOR, WLAN, CONT...
I try to follow all your step but still i got issue. once i check our MSE status, below is the output. is there any command to enable the HTTPS or HTTP?
Yes. PI unable to grab the SNMP poll from the ASA which on the WAN site. Is there any additional configuration need to be done instead of creating snmp community string in ASA? FYI, all our private ip address is NATed on our cisco router 3800.
Thanks for your reply. I manage to solve the problem. After I Set BOOT to point the the directory and file, I also Set MANUAL_BOOT to no. Below is the exampleap: set BOOT flash:/ap3g1-k9w8-mx.124-25e.JA1/ap3g1-k9w8-mx.124-25e.JA1ap: set MANUAL_BOOT ...
- What is your WLC model and software version?answer : WLC model : AIR-CT5508-K9Software version : 7.2.110.0- What is the shape of the command propmt when you try to write the "boot" command? is it [ap:] (without brackets) or [AP_name#] (without br...
