Hi Friends, in the past we have used a C899G-LTE-GA-K9 , with a 15.5(3)M2 and a AME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless MC7304 4G-GA"PID: MC7304 . Now we switched to a ISR4431/K9 with a isr4400-universalk9.03.16.02.S.155-3.S2 and a "Mode...

My ASA 5505 getting pretty hot after a while and so I used a wattmeter to find out what´s happening.260 watts is quite a lot if the device is running in idle mode and has no active device attached nor any config has been installed.What's your experie...

hi we got here 2 x 6509/Sup 720 running 12.2(18)SXD2. Some 2950 Access switches are connected via trunk (12.2(18)SXD2). We have a Novell DHCP/PXE Server running Netware 6.5. On our core is a HSRP process running *.253 (core1) *.254 (core2) + virtual ...

is there a new software version available for the CBQME-3.2-SW10-K9 in combination with CADE-2120-K9 and CBQME-PCI-4 ?I couldn't configure that anymore with the cisco config tool. but it worked one year ago with the combination above.please adviceth...

Hi, does the c3560-ipbasek9-mz.122-35.SE1.binimage will support dhcp-relay ?thank you