Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just want a faster connection between those two CBS250 switches instead of 1GbE copper cable?As stacking seems not available, what else could work, VLAN, trunk? If I plug-in a compatible 10Gtek SFP+ transceiver (each on port #1), the switch is no m...
Update:It works, I got two Cisco CBS250-24P-4X interconnected, each with one single 10Gtek SFP+ SR Multimode Modul "AXS85-192-M3” in SFP+ port #1, plus compatible LC-LC OM3 50/125 multimode fiber patch cable.Reason (I guess): Both switches are still ...
Update:It works, I got two Cisco CBS250-24P-4X interconnected, each with one single 10Gtek SFP+ SR Multimode Modul "AXS85-192-M3” in SFP+ port #1, plus compatible LC-LC OM3 50/125 multimode fiber patch cable.Reason (I guess): Both switches are still ...
Okay, reasonable, but if I order/buy/get new official supported tranceivers next days/week, will it work out-of-the-box, i.e. establish the interconnection without any settings in the switch-OS? Of do I have also again to enable the SFP+ ports or sim...
I use SFP+ trancievers from 10Gtek, they told me that these are compatible with CBS250-24P-4X...Or is this not true? I moved further details of my problem to a new topic:https://community.cisco.com/t5/small-business-switches/how-to-interconnect-two-c...
One single 10 GbE LC-LC-fiber connection between two CBS250 via SFP+ instead of a single 1 GbE copper cable via RJ45 would be sufficient as "outcome". Unless you say that an interconnect between two CBS250 via 10G SFP+ will never work...What else ar...
