Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
WLC: C9800-CL WLC version: 16.12.4aAP: C9115AXI-EAP OS version: 8.9.100.0Setup country: SpainCountry Code: ESSymptoms:1. ICMP is reachable from WLC to AP2. ICMP is reachable from POE to AP3. Access is not available to AP by SSH or telnet4. Operationa...
WLC: Catalyst 9800-CLOS Version: 16.12.4aAP: C9115AXI-KSymptom: Wireless users suffer wireless disconnection suddenly and randomly. Sometimes this kind of issue don't happen and works well. When this issue happened, the wifi icon at the windows botto...
I am converting ap 9115 to EWC.Issue1.After I set the ip address and gateway on the interface Gi for EWC.I enter 'write' command to save the configuration.But the error log is displayed on the screen "Failed to save vrrp-ip.txt".I have also set the s...
Hello,marce. I can not find where the root cause is. KMI_Sales_OASW_3#show platform tcam utilizationCAM Utilization for ASIC# 0 Max UsedMasks/Values Masks/valuesUnicast mac addresses: 16604/16604 210/210IPv4 IGMP groups + multicast routes: 1072/1072 ...
Due to privacy, the configuration of the issue port is available.interface GigabitEthernet1/0/10description ## S-2 ##switchport access vlan 126switchport mode accessswitchport voice vlan 127srr-queue bandwidth share 1 30 35 5priority-queue outauthent...
OASW_3#show sdm preferThe current template is "lanbase-default" template.The selected template optimizes the resources inthe switch to support this level of features for0 routed interfaces and 1024 VLANs.number of unicast mac addresses: 16Knumber of ...
