Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I updated my ASA 5512 to ASA 9.8(1), ASDM 7.8(1). I'm unable to edit site to site connection profiles. I can enter information in the "Basic" section, but I can't enter "Advanced -> Crypto Map Entry" and "Tunnel Group". The form just doesn't ...
Hi,
I'm trying to set up a site to site vpn.
Site A (local): 192.168.2.0/24, external IP 81.14.x.x. (CISCO ASA 5512)
Site B (remote): 192.168.5.0/24, dynamic external IP
IPsec Tunnel comes up nicely, data is transferred both ways.
I can't ping all of...
I have a network with two isps annd two firewalls. The config is as follows:
Firewall 1 (Netgear) providing internet access via Gateway 192.168.2.40Firewall 2 (ASA 5512) providing Internet access and VPN services via Gateway 192.168.2.45
What I try t...
I'm trying to built a site to site VPN between a TP-Link TL-R600VPN and an ASA 5512 running ASA 9.6(2) and ASDM 7.6(2)150.
I managed to complete phase 1 succesfully. Phase 2 fails due to "All IPSec SA proposals found unacceptable!" The error occurs ...
Hello,
when trying to build a site to site vpn I encounter the following problem:80.xx.xx.xx, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 192.168.0.0/255.255.255.0/0/0 local proxy 192.168.2.0/255.255.255.0/0/0 on interface ...
Ok, I got that - but how do I configure the pre-login check for antivirus software? I got Advanced Endpoint Assessment v.3.6 which I configured to check for our antivirus software. The checks are performed but connection is allowed even if antivirus ...
