About willmaci

willmaci · 11-02-2022

I'm currently running a ROAS config that goes up to some switch that is outside of my control. My ROAS works completely fine, however my cisco router has 4 ethernet ports that I'm trying to use but I can't seem to make them work. I tried setting up m...

willmaci · 10-30-2022

Sorry if this is a long post but i'm racking my brain against the wall here. I have a strange setup where the building owns the router and they have cables throughout the house and provide us with a switch only. I decided to put a cisco C841M-4X-JSEC...

willmaci · 10-02-2021

I'm currently studying for my CCNA and just had a little bit of confusion when it comes to OSPF and setting it up. Here would be the scenario 10.16.0.10/24 10.16.0.0/24 172.168.1.1/29 10.16.8.0/24 10.16.8.10/24 ...

willmaci · 11-03-2022

For anyone who needs to know what the full working config was. Here it is home#show run Building configuration... Current configuration : 2960 bytes ! ! Last configuration change at 05:00:01 UTC Fri Nov 4 2022 ! version 15.5 service timestamps debu...

willmaci · 11-03-2022

Thank you both very much for the help so far! And @Richard Burts I have been on these forums forever, it's awesome to have you on one of my questions! Thank you for all that you do!So I have done as you instructed. Added it to VLAN1 and now all of my...

willmaci · 10-31-2022

I forgot to put in the wildcard bits. Once I did, your config worked perfectly. Thank you so much for this! I marked it as the correct answer. For the sake of anyone having trouble with this same thing, I am leaving the config in here.Here was my fin...

willmaci · 10-31-2022

! Last configuration change at 12:24:01 UTC Mon Oct 31 2022 ! version 15.5 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname home ! boot-start-marker boot-end-marker ! ! enable secr...

willmaci · 10-31-2022

I was looking through documentation but my apologies, I couldn't find anything on configuring a different GW per VLANSo I believe there are 2 issues.1. Vlan communication is only one way for some reason.10.8.8.10 (PC1) >> 10.8.8.1 (Router gi0/4.4) >>...

Member Since	‎10-02-2021 12:42 AM
Date Last Visited	‎11-30-2022 12:05 AM
Posts	13
Total Helpful Votes Received	20

User Statistics

User Activity

ROAS and using ethnet ports on a router

Vlans can't talk to the gateway with static nat rule

OSPF confusion about routes

Re: ROAS and using ethnet ports on a router

Re: ROAS and using ethnet ports on a router

Re: Vlans can't talk to the gateway with static nat rule

Re: Vlans can't talk to the gateway with static nat rule

Re: Vlans can't talk to the gateway with static nat rule