Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All.I have a network with about 20 catalyst 3750 switches connected with each other with 'ring' topology. And all of them is in one VTP domain. One switch is acting as a VTP server and others are VTP clients. Now i need completely remove VTP from ...
i have cisco bridge 250 working in root mode. On station details and association table some IP addresses of the associated station look like IP Address ?10.3.2.19 What "?" means ?
does cisco 350 workgroup bridge and Bridgentransparent for 802.1Q frames ?I mean that if the 802.1Q tagged frame enters WGB's or BR's ethernet interface can it leave wireless interface unchanged and vice versa ?
my cisco 350 workgroup bridge disconnecting from 350 BRIDGE (working in AP mode) every 5 minute +/- 0-10 sec. log history from WGB:1/20 12:06:48 I Connected to parent Cisco-3a5560 <AP-NAME>1/20 12:06:48 S Lost our association, disassociate with statu...
I can't do it now, because i manage all switches remotely and they are far away from me and i can't create vlan's on the switch because it is in VTP client mode.So i think i must load previously prepared startup config for switches, start shedulled...
Switches connected to each other in ring topology by single mode optical fiber connections. Trunks configured with all vlans permitted on them....---|3750|---(fiber)---|3750|---(fiber)---|3750|---...and the last switch connected to first. So it is a ...
When i put switch in VTP client mode to VTP transparent mode i'm loosing connectivity with this switch. I think it deletes all vlans that it learns from server and that's why i'm loosing connection with this switch.
