Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It appears that EIGRP is available fully in the SUP7E, but you have to upgrade to IP Base, then to Enterprise Services. EIGRP stub routing is available in the IP Base upgrade. We looked at upgrading from LAN Base to IP Base for certain capabilities...
So you have one huge layer 2 network and are not doing any VLANning on it? You would need to after you setup the MSFC to route within the 6509. What kind of hosts are these? Windows tends to be kinda quirky when you switch gateway addresses on it....
From your last post , it does seem like you have a spanning tree loop. Can you provide how these two switches are connected and what else they are connected to? Also, you did not include any delta times in the output of your original post. How oft...
I wouldn't use a 3550 being that they are EOL, the 3560 might be capable with the EMI software loaded. For future expandability, I would use a 3750-EMI for this. The 3750 switches are stackable between all models (32Gbps backplane sharing), and the...
I had the same issue when I was working on CE500s and a WLC.In the CE500 Device Manager, go to Configure->VLANsCreate your VLAN 2 and 3.Then go back to smartports, click customize, and verify that VLAN-1 is default (native).Sending information throug...