Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All.wonder if anyone can helpWe have an aironet 1130ag in a remote office connected to the data centre over MPLS. The Radius server is based on server 2003We have hundreds of these points set up exactly the same but this is the only one giving me ...
Hi all.OK - I have a server that I need to be seen from the outside world - I set up NAT and it worked fine.....but it broke communication from clients from a site on the site-to-site VPN....so basically this router sits in our Moscow office and has ...
Hi EveryoneI've just set up a sit-to-site VPN from a branch office (cisco 1921) to our HQ (not cisco)The VPN establishes but I can not route traffic across the VPN.Currently the branch router has a public IP address set up on the LAN interface as thi...
Manaed to set IAS up on a box sat locally in the office to test with - authenticates fine to this box..... Looks like some part of the authentication process is getting lost across the WAN....
the fragmented packet might be a red herring as I've just done the same packet inspection on the same radius server but coming from a different access point which works, I get the same fragmented UDP packet but the connection works.any ideas?
used to have a similar issues on several of our laptops depending on how they were built.Driver updates fixed our problem though - not sur eif it will for you? but the error was the same for useReason: The message received was unexpec...
Done it.....ok so you were right but it has to be applied using a route-map - this explains it furtherhttp://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtmlthanks for help
HiThanks for that - I thought that might be the answeri've defined my ACL.....but how do I attach this in my NAT statementmy NAT statement which I have been using (the one that breaks it over the VPN) is:ip nat inside source static tcp 192.168.106.1...
