Hi configure my pc with a static ip 192.168.1.10 subnet 255.255.255.0 and save it.configure switch vlan 1 ip address 192.168.1.2 255.255.255.0no shutdown exitI was able to ping the switch virtual interface with results 0% packet loss but destination ...
Install Tera term on my lap top ,install usb/Rj45 console cable but my 2960s wouldn't provide a switch prompt and won't begin the startup process. I'm just starting out learning to configure my switch. ...
Thank you Flavio and David for your assistance. You guys were right the issue wasn't the switch it was the lab top. I had to create a ip address for my ethernet 2 connection for the realtek network adapter.
I have a USB 3.0 network adapter to Rj45 connection. Could the adapter be causing this issue. There's no exclamation mark in device manger indicating there's a problem.
Okay I will try again to figure this out. I purchase my lab kit from ciscocampus and it's brand new. I don't save the running config and just learning the commands from ccna v6 text books and reading the material. I have( 2) 2960 switches and (3) 192...
