Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is a customer entitled to IOS upgrades in the same feature set if they do not maintain SmartNets on the specific devices? We have heard it both ways. Anyone have a certainty on this one?
On a few of our routers (used as terminal servers) and a switch or two, we receive non-stop messages in the failed attempts of our ACS 3.2 and ACS 2.6 systems. The failed attempts usually contains the warning message and other items that wouldn't nor...
Does anyone know of a hidden command or anything else to manually set or set the starting revision number on a VTP server? This would be to prevent future VTP client addtions with high revision numbers from taking over VLAN database propagation. Loo...
Hi,Does anyone know of a command to clear the HITCOUNT on an ACL list and a command to clear the counters on an interface for the PIX? I can't seem to find this anywhere. Any help would be appreciated. Thanks.Jeff
I am looking to utilize existing VIP2-40s for either the PA-T3+ or PA-2T3+ port adapters. Has anyone had any issues with this VIP on these port adapters? Thanks.
That worked! Thanks. Strange that you have to do it in config mode rather than priv. exec. (enable mode) and that is what I was doing wrong. Have a good one!Jeff
In 6.3 the translations are allowed without a static (inside,outside) x.x.x.x x.x.x.x netmask 255.255.255.255 command and only needs a permit statement in the ACL bound to the outside interface. We are looking to upgrade to 6.3 to take advantage of ...
Yes I agree with Travis-Dennis. You should take a base line of what is happening on your network first and then decide if the sigs. that fire are worth a response to. We took about 3 days of just "watching" what was going on before making dynamic r...
