Hello,I have a question regarding the port stats on a switch. The model is a 3524 XL PWR EN. Here's the output:FastEthernet0/20 is up, line protocol is up Hardware is Fast Ethernet, address is 0006.53a6.3754 (bia 0006.53a6.3754) Description: MT...
What is with the Cisco VPN Client?If I install it and decide that I want to customize its location (i.e. move it from START/ALL PROGRAMS/CISCO VPN CLIENT to say START/ALL PROGRAMS/CISCO STUFF/CISCO VPN CLIENT (with the "Cisco Stuff" being the only c...
Hello,Does anyone know if there's such thing as an auto attendant feature for CCME? I don't have CUE, so I can't use that.If so, please provide a URL.Thanks,Dave
Does anyone know if it's possible to customize the VPNC login page?I'd like to put up our corporate logo and some text around acceptable use, blah, blah.I know you can customize the client, but I'd like to change the VPNC itself.Thanks,Dave
Hello,Can anyone recommend any CME billing applications that I could review? I've been looking at MINDCTI (MEIPS), but they won't provide a copy for me to review on my own without charging for the setup. I'm also looking at StoneVoice, but for some...
Neat utility Dave.However, I think I'm not understanding something:My interface on a show int fa0/2 shows that it's been 22d since the last output. However, the MIB entry says something like close to zero (0) for the entry IfLastChange.Take a look:C...
Great, thanks for your input (to both of the repliers). Now for another question related to this.I'm wondering if there's any sort of utility that could use that data to show inactive ports over a series of switches.For example, we have about 20 swi...
Hi Andy,Here's something that we used to do where I worked:We had 6509's with three/four 48 port blades servicing between 150 and 200 phones roughly. I had four total switches, one on each of four floors. So this would be roughly similar to your DC...