Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good afternoonWe purchased a Windows Surface 11 to test and found that it is not seeing our MR33 APs at all. Other versions of Surfaces that have intel chipsets do see and connect, but for some reason, the Qualcomm is not seeing the AP.I have done s...
I recently purchased a FL-VPERF-8P-200 license to increase the throughput of my IPSec tunnel to 250 Mbps. I received the PAK and added it to my smart account. From here I am stumped. I cant figure out how to enable this feature on my C1111-8P. W...
Hello all, I have a point to point circuit connected between my test router and asa. I need the traffic on this circuit to be encrypted even though it is P2P. I have configured a S2S VPN using Ikev2 IPSec but I am having issues with it not connect...
Correct. When I advertised the SSID publicly, its visible and I can connect. When its hidden, the SSID is not able to be connected to. The wireless GPO lets PCs in the GPO security group see the SSID and connect based on computer certificates. Th...
I have also seen some clients having issues with hidden SSID (and hidden SSID is "NOT a securityfeature(tm)" ) ... so start sending those beacons containing the name if you have disabled that )This may be the issue. When I unhide the SSID, its pop...
All of our APs are MR33 and have the same SSID. Our SSID is hidden. Its sent to the devices via GPO and the clients have certificate authentication. This works on all other devices but the surface with the qualcomm adapter. I will test your sugge...
It sees other SSIDs. It just won't see the MR33. If you connect a wireless USB adapter, that adapter sees the MR33. It's just an issue with the Qualcomm adapter and the MR33.We did update the driver to make sure it wasn't a driver issue.
Although I had no luck here, I was able to find the solution.To enable the IPsec Performance License on a Cisco ISR 1100 perform the following:verify license is in your Smart AccountRouter(config)#platform hardware throughput level 250000Save configR...
